Patinna-MR offers better moisture resistance because it is made with specialised resins. It is suitable for areas that are periodically exposed to damp or humid conditions such as kitchens, bathrooms and laundries. It should not be used around showers, spa pools, or other areas in regular contact in water.

Because Patinna-MR is available in a wide range of thicknesses, it can be used for everything from walls and ceilings to vanities and shelving. It can also be used to create architraves, skirtings and mouldings. Patinna-MR makes an excellent substrate for a natural wood veneer, vinyls, printed papers, foils and melamine papers. It is not recommended for external use.

All of our products are available with Pure FSC wood source which means that you are assured that the wood chips are sourced from sustainably managed forests.

View the Physical Property Specifications for Patinna-MR

  • Metric
  • Imperial
  • Click to View Our Brochure
    		•  Download Acrobat Reader Free!
    (To download, or save this brochure, please right mouse button click on the above link - Click to View Our Brochure - and select 'Save Target As'. If you have not got Acrobat Reader please click on the Acrobat image above to download a free copy.)



    Patinna-MR Aim Properties when tested to JIS A 5905-2003
    Property METRIC 12.00mm 18.00mm 25.00mm
    Density kg/m3 730 730 730
    Weight kg/m2 8.8 13.1 18.3
    Panels Per Pack 70 47 34
    Internal bond MPa 1.3 1.3 1.3
    Moisture Content % 7.0 7.0 7.0
    Thickness Swell % 7 6 6
    MOE MPa 3700 3700 3500
    MOR MPa 50 50 50
    Formaldehyde mg/L 0.5 0.5 0.5
     
    Property IMPERIAL 0.472" 0.709" 0.984"
    Density lb/ft3 46 46 46
    Weight lb/ft2 1.8 2.7 3.7
    Panels Per Pack 70 47 34
    Internal bond lb/in2 189 189 189
    Moisture Content % 7.0 7.0 7.0
    Thickness Swell % 7 6 6
    MOE lb/in2 536500 536500 507500
    MOR lb/in2 7250 7250 7250
    NOTES: These values represent anticipated average values and are guidelines only. Please note that Dongwha Patinna NZ Limited reserve the right to change product specifications without notice.

    Other thicknesses are available on request

    General Tolerances
    Length/Width +/- 2 mm (+/- 0.079 in)
    Thickness Tolerance +/- 0.15 mm (+/- 0.006 in)
    Straightness 1.125 mm/m (0.015 in/ft)
    Squareness <1.5 mm/m (<0.018 in/ft)
    Sanding grit 180