Patinna-UltraLight has been produced with an average density that is approximately 30% lighter than Patinna density product. Panels can be laminated and machined, however these operations do require more care in order to produce a high quality result.

Patinna-UltraLight is suitable for interior applications where weight of the finished assembly is an important consideration. Caravan and mobile home fittings are good applications for Patinna-UltraLight. Try Patinna-UltraLight as a substrate for overlaid benchtops either as a single thickness panel or in multiple laminated panels to give the desired bulk.

You can request any of our products with Pure FSC wood source which means that you are assured that the wood chips are sourced from sustainably managed forests

View the Physical Property Specifications for Patinna-UltraLight

Download Acrobat Reader Free!
(To download, or save this brochure, please right mouse button click on the above link - Click to View Our Brochure - and select 'Save Target As'. If you have not got Acrobat Reader please click on the Acrobat image above to download a free copy.)


Patinna-Ultralight Aim Properties when tested to JIS A 5905-2003
Property METRIC 12.00mm 18.00mm 25.00mm
Density kg/m3 520 520 520
Weight kg/m2 6.2 9.4 13.0
Panels Per Pack 70 47 34
Internal bond MPa 0.5 0.7 0.7
Moisture Content % 7.0 7.0 7.0
Thickness Swell % 12 7 7
MOE MPa 2600 2600 2600
MOR MPa 27 24 15
Formaldehyde mg/L 1.5 1.5 1.5
 
Property IMPERIAL 0.472" 0.709" 0.984"
Density lb/ft3 32 32 32
Weight lb/ft2 1.3 1.9 2.7
Panels Per Pack 70 47 34
Internal bond lb/in2 73 94 94
Moisture Content % 7.0 7.0 7.0
Thickness Swell % 12 7 7
MOE lb/in2 377000 377000 377000
MOR lb/in2 3915 3480 2175
NOTES: These values represent anticipated average values and are guidelines only. Please note that Dongwha Patinna NZ Limited reserve the right to change product specifications without notice.

Other thicknesses are available on request

General Tolerances
Length/Width +/- 2 mm (+/- 0.079 in)
Thickness Tolerance +/- 0.15 mm (+/- 0.006 in)
Straightness 1.125 mm/m (0.015 in/ft)
Squareness <1.5 mm/m (<0.018 in/ft)
Sanding grit 180